---
title: "Blackmagic ATEM"
url: "https://showcaller.ai/integrations/blackmagic-atem/"
type: "integration"
published: "2026-03-04T15:04:08+00:00"
modified: "2026-11-06T19:33:05+00:00"
author: "admin"
---

Showcaller AI gives you ATEM remote control by voice or chat. The director calls the shot, and Showcaller presses the buttons. For example, it puts camera 3 on Preview and takes it with an Auto transition. It cuts to the laptop or sends Program to the aux that feeds the confidence monitor. It can also bring the lower third on with the downstream keyer. Or it runs the macro your team recorded for the opening.

Showcaller connects to the switcher over your local network through the Bridge App. The ATEM needs no login. First, Showcaller reads the switcher’s own topology. That means how many M/Es, aux outputs, keyers, DVEs and Super Sources it has. It also lists your inputs by the names your team gave them. So you can say Camera 3 or Laptop instead of an input number.

After a change, Showcaller reads the switcher’s state back. It only reports success when the ATEM agrees. Showcaller checks which input is on Program and Preview and whether a keyer is on air. It also checks what an aux shows and whether recording or streaming is running. If the switcher does not agree, you hear about it straight away.

Showcaller supports these model families on switcher firmware 9.x: the [ATEM Mini Series](/integrations/blackmagic-atem/atem-mini-series/) and ATEM Mini Extreme Series. It also supports the ATEM SDI Series and [ATEM Constellation / Television Studio](/integrations/blackmagic-atem/atem-constellation-tv-studio/). Audio control covers the classic audio mixer, for example on Television Studio HD. It also covers Fairlight audio, depending on the model. You can read about the [ATEM Mini range](https://www.blackmagicdesign.com/products/atemmini) on the Blackmagic Design site.

## Questions about ATEM remote control

### Which ATEM models are supported?

Showcaller supports ATEM Mini Series and ATEM Mini Extreme Series switchers. It also supports ATEM SDI Series and ATEM Constellation / Television Studio. Showcaller works with them on firmware 9.x. Some functions depend on the hardware. For example, Super Source is not available on ATEM Mini Series or Television Studio HD. Recording and streaming need a model with a built-in recorder or streaming encoder. Fairlight functions also need a Fairlight model.

### What do I need to connect it?

You need the switcher’s IP address. You also need the Showcaller Bridge App on a computer on the same network. The ATEM needs no username or password.

### Which plan includes which Tool Functions?

Starter includes Device Diagnostics, Core Switching and Transition Control (12 Tool Functions). Pro adds Routing & Keyers, Macro Control, Recording & Streaming and the classic Audio Mixer (21 more). Enterprise adds Super Source and Fairlight Audio (11 more). Each plan includes every Tool Function of the plans below it.

### Can I refer to sources by name?

Yes. Showcaller reads the input names from the switcher. So Camera 3 or Laptop works as well as an input number.

### Does Showcaller confirm the cut actually happened?

Yes. After a cut or transition, Showcaller reads which input is on Program from the switcher. When the ATEM does not agree, it reports the mismatch.
