---
title: "Dante Controller"
url: "https://showcaller.ai/integrations/dante-controller/"
type: "integration"
published: "2026-06-24T00:44:39+00:00"
modified: "2026-11-06T19:33:05+00:00"
author: "admin"
---

With Showcaller AI, Dante audio routing is as simple as asking for it. This is Showcaller’s Dante Network integration, not Audinate’s Dante Controller app. Instead, the integration works alongside [Audinate’s Dante Controller app](https://www.getdante.com/products/software-essentials/dante-controller/), and both can run on the same computer. Showcaller talks to Dante devices directly from the Bridge App on your show network. You need no Dante Domain Manager and no per-device setup. Just add one connection, with no IP address to type. Then Showcaller discovers every Dante device on the network.

From there, Showcaller lists each device’s transmit and receive channels. It also shows what every receive channel subscribes to. Dante audio routing then works by name, so you route a receive channel to a transmitter by device and channel name. For example, say “send stage box channel 3 to the recorder, input 1”. You can also clear a route.

To keep the patch readable, Showcaller can rename devices and label channels. It can also set a device’s sample rate, bit depth and receive latency. The same goes for sample-rate pull-up or pull-down. On devices with adjustable outputs, such as AVIO adapters, it sets the analog output level too.

A network-wide view reports whether each device is online. It also counts how many of its incoming routes are healthy or broken. So a broken patch shows up before someone hears it.

Showcaller reads most changes back from the device before it reports them done. Some changes interrupt audio or can break routes, such as sample rate, bit depth and latency. Pull-up, device renames and clearing a route belong in that group too. Showcaller confirms those with you first. For networks that use Dante Domain Manager, see the [Dante Domain Manager integration](/integrations/dante-domain-manager/).

## Questions about Dante audio routing

### Do I need Dante Controller or Dante Domain Manager?

No. Showcaller talks to Dante devices directly. It can run alongside Audinate’s Dante Controller app if you use it, but it does not need it.

### What do I need to set up?

Add one Dante Network connection in Showcaller. There is no IP address, username or password to enter. However, the Showcaller Bridge App must run on a computer on the same network as the Dante devices. That can be a LAN or a VLAN.

### Which plan includes which Tool Functions?

Starter includes Device & Channel Status and Audio Routing (11 Tool Functions). That covers discovery, route health, channel lists, and subscribing and clearing routes. Pro adds Labeling and Audio Configuration (11 more). That covers device and channel names, plus sample rate and bit depth. It also covers latency, pull-up and output level. There are no Enterprise-only functions for this integration. Each plan includes every Tool Function of the plans below it.

### Will renaming a device break routes?

It can. Dante receivers find their sources by device and channel name. So renaming a device or a transmit channel can break or redirect routes that use it. For that reason, Showcaller asks you to confirm a device rename first.

### Does changing the sample rate interrupt audio?

Yes, briefly. Sample rate and bit depth changes interrupt the device’s audio for a moment. So Showcaller asks you to confirm first.
