---
title: "NETGEAR AV Line"
url: "https://showcaller.ai/integrations/netgear-av-line/"
type: "integration"
published: "2026-03-04T15:00:36+00:00"
modified: "2026-11-06T19:33:05+00:00"
author: "admin"
---

Keep the show network in check from the same seat you run the show. Showcaller AI connects to NETGEAR AV Line managed switches in the M4250, M4300, M4350 and M4500 series. It answers the questions that usually mean a walk to the rack. For example, which port is that camera on, and how much PoE does it draw? How much of the switch’s power budget is left? Also, which ports carry the Dante VLAN, and which multicast groups are on the switch?

Is a PTZ camera or an NDI encoder frozen? Then ask Showcaller to turn the PoE power on its port off and back on. Some network changes can take part of the show down, such as port power and VLAN changes. Port settings, reboots and firmware belong in the same group. So Showcaller confirms each of these with you before it sends them.

The NETGEAR AV Line integration also covers VLANs and their AV network profiles. It handles link aggregation (LAG and MLAG) and LLDP neighbors, plus port traffic and error counters. You can run ping, traceroute and DNS tests from the switch itself. Showcaller also manages DHCP reservations and bindings, switch user accounts, and configuration backup and restore. Finally, it handles firmware and fan mode for quiet rooms.

Showcaller reaches the switch through the Bridge App on your show network. It signs in with the switch’s own admin account. Then it reads some changes back from the switch to confirm they landed, such as port and PoE settings. For others, it reports what the switch answered.

## Questions about NETGEAR AV Line switches

### Which NETGEAR switches are supported?

Showcaller supports the M4250, M4300, M4350 and M4500 series, on switch firmware 13.x. For example, you can read about the [M4250 series](https://www.netgear.com/business/wired/switches/fully-managed/m4250/) on the NETGEAR site.

### What do I need to connect a switch?

You need the switch’s management IP address, which uses web port 80 by default. You also need an admin username and password for the switch. Then run the Showcaller Bridge App on a computer on the same network.

### Which plan includes which Tool Functions?

Starter includes Basic Switch Operation: switch info and port and PoE status (5 Tool Functions). Pro adds Port & PoE Management and AV Networking (6 more). These cover PoE on/off per port, port settings and LLDP neighbors. They also cover LAG, MLAG and multicast groups. Enterprise adds Advanced PoE, VLAN Management and Switch Administration. It also adds Network Diagnostics and DHCP & Accounts, so Enterprise brings 44 more in total. Each plan includes every Tool Function of the plans below it. See the [pricing page](/pricing/) to compare plans.

### Will Showcaller change my network without asking?

No. Some changes can affect traffic or power, such as PoE, port settings and VLANs. Reboots, firmware, configuration restores and factory reset belong here too, and so do user accounts. Showcaller asks for your confirmation before it sends any of them.

### Can it read my spanning tree configuration?

No. Showcaller can set the switch’s spanning tree priority. However, it does not read the spanning tree topology.
