---
title: "Panasonic PTZ"
url: "https://showcaller.ai/integrations/panasonic-ptz/"
type: "integration"
published: "2026-03-08T16:05:58+00:00"
modified: "2026-11-06T19:33:05+00:00"
author: "admin"
---

Call your Panasonic PRO PTZ cameras the way a camera operator would. This is Panasonic PTZ remote control by voice or chat, with Showcaller AI. For example, ask Showcaller to recall preset 4 on camera 2 or send camera 1 home. You can also store the current shot as the lectern preset. Or ask it to pan left slowly until you say stop.

Showcaller connects to each camera over your local network through the Bridge App. Before the show, it can read each camera’s model, firmware and pan and tilt position. It also reads lens zoom, focus and iris, the tally state and the last recalled preset. So you know the fleet is where it should be.

During the show, Showcaller recalls and stores presets 1 to 100. It moves pan, tilt and zoom with Panasonic’s own speed control. It also switches focus and iris between auto and manual. And it can pull focus by hand and set the iris level.

Showcaller also handles the camera’s IP video output. First, it reads which streaming mode the camera is in and what it supports. Then it can switch between modes such as H.264, H.265, SRT or NDI|HX. It also sets the NDI name and group, and changes resolution, frame rate and bitrate. Before a stream change or storing a preset, Showcaller asks you to confirm. Where the camera reports the result, Showcaller reads it back.

Supported cameras range from the [AW-UE160](https://eu.connect.panasonic.com/gb/en/broadcast-proav/remote-ptz-camera-systems/aw-ue160) to the AW-UE4, with the full list in the FAQ below. However, not every model offers every streaming mode. So Showcaller can read each camera’s own capability report to see what it supports.

## Questions about Panasonic PTZ remote control

### Which Panasonic cameras are supported?

Showcaller supports the AW-UE160, AW-UE150 / UE150A, AW-UE100 and AW-UR100. It also supports the AW-UE80 / UE50 / UE40, AW-UE30 / UE20 / UE4 and AW-HE145 / HE130. Streaming features vary by model. For example, the AW-UE150 offers NDI|HX but not full NDI.

### What do I need to connect a camera?

You need the camera’s IP address. The web port is 80 by default. If authentication is on, you also need the camera’s username and password. Finally, run the Showcaller Bridge App on a computer on the same network.

### Which plan includes which Tool Functions?

Starter includes Device Diagnostics and IP Video Diagnostics (27 Tool Functions). They cover camera status, presets (recall and store), home and exact positioning, reboot and all stream reads. Pro adds Basic Controls and IP Video Control (17 more). Basic Controls covers pan, tilt and zoom, plus focus and iris modes and the iris level. IP Video Control sets the stream mode, codec and NDI. It also sets bitrate, frame rate and resolution. Enterprise adds Advanced Controls (manual focus pulls, tally) and Advanced Output Profiles (extra stream profiles and delivery) (8 more). Each plan includes every Tool Function of the plans below it. See [pricing](/pricing/) for the plans themselves.

### Can Showcaller power cameras on and off?

No. Showcaller has no power on or off function. It can reboot a camera, but the camera then drops its video and control while it restarts.

### Can I control Panasonic cameras that are inside vMix?

Yes, in two ways. You can control them directly with this integration. Or you can use vMix’s own PTZ inputs with the [vMix integration](/integrations/vmix/).
