---
title: "Panasonic AW-UE100"
url: "https://showcaller.ai/integrations/panasonic-ptz/panasonic-aw-ue100/"
type: "integration_model"
published: "2026-10-07T15:21:21+00:00"
modified: "2026-10-07T15:21:21+00:00"
author: "admin"
---

The Panasonic AW-UE100 is a 4K PTZ camera with a 1/2.5-type 4K MOS sensor and a 24x optical zoom. It outputs 12G-SDI, 3G-SDI and HDMI. Over IP, it streams H.264, H.265, SRT, RTMP and MPEG2-TS over UDP. It also includes NDI High Bandwidth and NDI|HX2 as standard. NDI|HX2 needs firmware 1.56 or later. In addition, one LAN cable can carry control, video and PoE++ power. Showcaller AI runs the Panasonic AW-UE100 by voice or chat over that same network.

### How Showcaller connects to the Panasonic AW-UE100

Showcaller connects through the Showcaller Bridge App, a small app on a computer on the show network. It sends Panasonic’s own IP control commands over HTTP, on port 80 by default. Then the operator asks in plain words, by voice or in chat. For example, they can say **camera 2, recall preset 4** or **send camera 1 home**. They can also say **pan left slowly** and then **stop**. Before it stores a preset, Showcaller asks the operator to confirm. After a move or a mode change, it reads the camera’s state back where the camera reports it.

### Streaming modes on the AW-UE100

The UE100 supports every streaming mode that Showcaller can switch. That covers H.264, H.265, RTMP, SRT, MPEG-TS over UDP and NDI. First, Showcaller can read the modes, resolutions and frame rates the camera reports. Then it can switch the mode, set the NDI source name and group, and change bitrate, frame rate or resolution. Every stream change waits for the operator to confirm it. Note one limit from Panasonic: the camera does not send 4K in NDI|HX2 mode. So for a 4K NDI feed, choose NDI High Bandwidth instead.

### Tool Functions by plan

Starter covers camera status, presets 1 to 100, home and exact positioning, and reboot. It also covers every stream read. Pro adds pan, tilt and zoom at a chosen speed. It also adds focus and iris modes and the iris level. In addition, Pro adds stream mode, codec, NDI, bitrate, frame rate and resolution. Enterprise adds manual focus pulls, tally on or off and extra stream profiles. Each plan applies in full to the Panasonic AW-UE100. The [Panasonic PTZ integration](/integrations/panasonic-ptz/) page lists every function. For full specs, see Panasonic’s [AW-UE100 product page](https://pro-av.panasonic.net/en/products/aw-ue100/).