---
title: "Shure ULXD4 single-channel receiver"
url: "https://showcaller.ai/integrations/shure-wireless/shure-ulxd4/"
type: "integration_model"
published: "2026-10-08T10:39:53+00:00"
modified: "2026-10-08T10:44:30+00:00"
author: "admin"
---

The Shure ULXD4 is a half-rack ULX-D digital receiver for one wireless channel. It has an XLR output, a 1/4″ output and one Ethernet port. Showcaller AI connects to the Shure ULXD4 over your show network through the Bridge App. Then it answers the questions an A2 asks all show long, by voice or chat. For example: How long is left on the lectern pack? Is the podium mic muted? What gain is it at? The [Shure wireless integration](/integrations/shure-wireless/) page lists every function.

### Battery and status on the Shure ULXD4

Showcaller reads the full channel status in one request. It reads the transmitter battery as bars, from 0 to 5. With Shure rechargeable batteries, it also reads the runtime in minutes. In addition, it reads the charge and health percentages of those batteries. Shure rates ULX-D rechargeable metering as accurate to within 15 minutes. With AA batteries, however, Showcaller reads the bars only. Battery and mute functions are in every plan.

### Remote mute and gain

ULX-D is the only Shure family in this integration with remote audio mute. So on the ULXD4, Showcaller mutes and unmutes the audio output. Meanwhile, the RF link to the transmitter stays up. Shure notes that a power cycle unmutes the output. Therefore, ask Showcaller for the mute state after a restart. From the Pro plan, Showcaller reads and sets the output gain in 1 dB steps. The range is -18 to +42 dB, the receiver’s own range. It also sets the channel name, from 1 to 8 characters, so “LECTERN” shows on the front panel.

### Frequencies, and how the Shure ULXD4 differs

With Enterprise, Showcaller reads the channel’s frequency in kHz and its Group and Channel. It can also move the channel to a new frequency or Group/Channel. First, though, it asks you before it retunes. Showcaller can also flash the front-panel LEDs to find the unit in a rack. Unlike the ULXD4D and ULXD4Q, the ULXD4 has no Dante output and no internal power supply. Instead, it runs from an external 15 V DC supply. AES-256 encryption is still available, and you set it on the receiver. Finally, Showcaller does not scan the spectrum or lock transmitters. For full specs, see Shure’s [ULXD4 product page](https://www.shure.com/en-US/products/wireless-systems/ulx-d_digital_wireless/ulxd4).
