---
title: "Shure ULXD4Q quad-channel receiver"
url: "https://showcaller.ai/integrations/shure-wireless/shure-ulxd4q/"
type: "integration_model"
published: "2026-10-08T10:39:53+00:00"
modified: "2026-10-08T10:44:30+00:00"
author: "admin"
---

The Shure ULXD4Q puts four ULX-D digital receivers in one rack unit. Each channel has its own gain control, meters and XLR output. In addition, the unit has Dante on two Ethernet ports and an internal power supply. Showcaller AI connects to the Shure ULXD4Q over your show network through the Bridge App. Then it answers the questions an A2 asks all show long, for any of the four channels. For example: Which pack is lowest on battery? What gain is channel 3 at? Is the panel mic on channel 4 muted? The [Shure wireless integration](/integrations/shure-wireless/) page lists every function.

### Battery on all four channels of the Shure ULXD4Q

Showcaller reads the status of all four channels in one request. That makes a quick battery round before the next session easy. For each channel, it reads the transmitter battery as bars, from 0 to 5. With Shure rechargeable batteries, it also reads the runtime in minutes. It reads their charge and health percentages, too. Battery and mute functions are in every plan.

### Remote mute, gain and names

Remote mute is the main difference between ULX-D and the QLX-D and SLX-D receivers. On the ULXD4Q, Showcaller mutes and unmutes each channel’s output. Meanwhile, the RF link to the transmitter stays up. However, Shure notes that a power cycle unmutes the outputs. So ask Showcaller for the mute state after a restart. From the Pro plan, Showcaller reads and sets each channel’s gain in 1 dB steps, from -18 to +42 dB. It also names each channel with 1 to 8 characters, such as “PANEL1” to “PANEL4”.

### Frequencies on Enterprise

With Enterprise, Showcaller reads each channel’s frequency in kHz and its Group and Channel. It can move a channel to a new frequency or Group/Channel. First, though, it asks you before it retunes. Showcaller can also flash the front-panel LEDs to find the unit in a rack. Note that the ULXD4Q’s own features stay on the receiver. For example, audio summing turns the unit into a four-channel mixer. Likewise, frequency diversity, High Density mode and Dante routing are set on the receiver or in Wireless Workbench. Showcaller does not scan the spectrum or lock transmitters. For full specs, see Shure’s [ULXD4Q product page](https://www.shure.com/en-US/products/wireless-systems/ulx-d_digital_wireless/ulxd4q).
