---
title: "Ubiquiti AV"
url: "https://showcaller.ai/integrations/ubiquiti-av/"
type: "integration"
published: "2026-06-18T00:32:14+00:00"
modified: "2026-11-06T19:33:05+00:00"
author: "admin"
---

Run UniFi Pro AV switches and the rest of your show network from the same seat. Showcaller AI works with the UniFi Network controller, by voice or chat. It manages UniFi Pro, Pro Max and Pro XG switches as well as UniFi gateways. So you can ask which port the stage camera is on, or how many watts it draws. You can also say “restart the frozen NDI encoder on port 14.”

For AV-over-IP, Showcaller applies UniFi Pro AV profiles (presets) to one port or several at once. Examples include NDI & Dante Audio, Dante, AES67, Q-SYS and SDVoE. It also turns on IGMP snooping, so multicast streams only reach the ports that asked for them. Then it can switch jumbo frames and flow control on or off.

Showcaller also manages VLAN networks and reusable port profiles. It names ports, turns them on or off and sets PoE mode. For diagnostics, it reads per-port traffic and error counters. It also reads device CPU, memory and temperature, and shows which switch port each client uses.

On a gateway, Showcaller reads internet, LAN, Wi-Fi and VPN health. It lists, toggles or edits firewall rules and port forwards. For example, it can open a path to a streaming encoder. You can learn more about this gear on the [Ubiquiti site](https://ui.com/).

Some changes can take part of the network down. Examples are power-cycling a port, restarting or upgrading a device, and VLAN or profile changes. AV presets and firewall edits also count, so Showcaller confirms all of these with you first. Afterwards, Showcaller reads some changes back from the controller to confirm they landed. For others, it reports what the controller answered. You add each switch and gateway as its own connection. Then Showcaller reaches the controller through the Bridge App on your show network.

## Questions about UniFi Pro AV with Showcaller

### Which UniFi devices are supported?

Showcaller supports UniFi Switch Pro, Pro Max and Pro XG models, including PoE and Aggregation versions. On the gateway side, it supports the Dream Machine Pro, Pro Max and SE. It also supports the Dream Router 7 and 5G Max, plus the Express 7. Then come the Cloud Gateway Ultra, Max and Fiber, and the UXG Lite, Pro and Enterprise. The list also includes the Enterprise Fortress Gateway. Port and PoE functions apply to switches, while gateway and firewall functions apply to gateways. PoE functions only apply to PoE models.

### What do I need to connect?

You need the IP address and port of your UniFi Network controller. The port is 443 on a UniFi OS console, such as a Dream Machine or Cloud Gateway. It is 11443 on the UniFi OS Server desktop app, and 8443 on the older self-hosted Network application. You also need a local admin account on the controller with two-factor authentication off. Ubiquiti cloud or SSO accounts do not work. Finally, the Showcaller Bridge App must run on a computer that can reach the controller.

### Which plan includes which Tool Functions?

Starter includes Switch Discovery & Status (9 Tool Functions). Pro adds Port & PoE Control, Pro AV Optimization, and Diagnostics & Clients (15 more). Enterprise adds VLAN & Network Management, Switch Port Profiles, Switch Administration, and Gateway & Firewall (24 more). Each plan includes every Tool Function of the plans below it. You can compare the plans on the [pricing page](/pricing/).

### Why do I need a separate local admin account?

The Bridge App signs in with a username and password, but it cannot answer a two-factor code. So create a local-only admin in the UniFi console with two-factor turned off. Then use that account for Showcaller.

### Do I connect to each switch directly?

No. Showcaller talks to the UniFi Network controller that manages your switches and gateways. It uses the controller’s IP address, not the address of each switch. However, you still add each switch you want to control as its own connection in Showcaller.
