---
title: "vMix"
url: "https://showcaller.ai/integrations/vmix/"
type: "integration"
published: "2026-03-04T14:56:38+00:00"
modified: "2026-11-06T19:33:05+00:00"
author: "admin"
---

Showcaller AI is a vMix AI assistant that runs vMix for you by voice or chat. Say camera 2 and it cuts or fades that input to Program. Then ask for the lower third for John. Showcaller finds the title input that contains that name and cues it on Preview. When you ask for the stream to start, it starts it. It then reads back the recording and streaming status that vMix reports.

Showcaller works through the Web Controller built into vMix, so you install nothing extra on the vMix machine. Instead, the Showcaller Bridge App runs on a computer on your show network and connects to vMix directly. Showcaller supports vMix 29.x.

The integration covers switching and transitions. It also handles input audio, the master bus and buses A-G. For graphics, it drives the eight overlay channels and the ten layers inside an input. Showcaller works with title text and countdowns, Data Source Manager rows, playlists and browser inputs. It also controls recording, streaming, SRT and external outputs, plus MultiCorder. Finally, it runs Instant Replay and the PTZ cameras that you add as vMix inputs.

Where vMix reports the result of a change, Showcaller reads it back before it calls the change done. However, vMix does not report everything, such as input layer visibility. In those cases, Showcaller tells you it sent the command but could not confirm it. Every command and its result also goes into [Air Check](/features/air-check/), the show’s record. You can learn more about vMix itself at [vmix.com](https://www.vmix.com/).

## Questions about vMix AI

### Which versions of vMix are supported?

Showcaller supports vMix 29.x. It uses the Web Controller that comes built into vMix.

### What do I need to set up?

First, turn on Web Controller in the vMix settings. The default port is 8088. Then run the Showcaller Bridge App on a computer that can reach the vMix machine on the network. Some Data Source Manager features need the Bridge App to run on the same machine as vMix. For example, searching a data source for a name needs it.

### Which plan includes which Tool Functions?

Starter includes Switching Essentials, Audio Control, and Recording & Streaming (36 Tool Functions). Pro adds 110 more. They cover Audio Advanced, Transitions Advanced and Recording Advanced. Pro also adds Overlays & Graphics, Input Layers, Title Control and Data Source Manager. Then come Input Control, Output & Display, Playlist and Browser Control. Enterprise adds Instant Replay and PTZ Camera (27 more). Each plan includes every Tool Function of the plans below it.

### Can Showcaller control my PTZ cameras through vMix?

Yes, if you add the cameras to vMix as PTZ inputs. Showcaller can then pan, tilt, zoom and focus them. It can also send them home and store or recall presets. For direct control of Panasonic PTZ cameras, see the [Panasonic PTZ integration](/integrations/panasonic-ptz/).

### Does Showcaller confirm every change in vMix?

It reads back every change that vMix reports. For example, it checks which input is on Program and whether recording is running. However, vMix does not report everything. Showcaller cannot read back input layer visibility, for instance. So when it cannot confirm a change, Showcaller tells you.
