Allen & Heath Avantis
Mute, set faders and sends, assign, label and recall scenes on an Avantis.
14 Tool Functions · 7 capabilities · 1 supported model
Capabilities
Everything Showcaller can do with Allen & Heath Avantis
Connect Showcaller to an Allen & Heath Avantis console over its network MIDI control. The assistant mutes and sets fader levels on inputs, groups, auxes, matrices, FX channels, mains and DCAs, switches mute groups, sets input send levels to auxes, FX sends and matrices, assigns inputs to DCAs, mute groups and the main mix, names and colours channels, and recalls scenes. It reads channel names and colours back; the desk offers no read for mutes, faders, sends or assignments, so those are sent without confirmation from the desk. Requires Showcaller Bridge 7.20 or newer.
Badges show the plan a group of Tool Functions is included from. Higher plans include everything below them. Compare plans
Tool Functions
Every Tool Function for Allen & Heath Avantis
Grouped by capability, with the plan each group is included from. Where the device reports its state, Showcaller reads the change back before calling it done.
Device DiagnosticsStarter1
Confirm the Avantis console is online and answering before the show, with one read of a channel name over the network.
- Get console statusCheck the Avantis console is online and reachable by reading input 1's channel name.
Mutes & FadersStarter3
Mute a microphone, ride an input, main or DCA fader, or switch a mute group on the Avantis without touching the surface.
- Set channel muteMute or unmute an Avantis channel: input, group, aux, matrix, FX send or return, main mix or DCA.
- Set fader levelSet an Avantis fader level in dB: input, group, aux, matrix, FX send or return, main mix or DCA.
- Set mute groupTurn an Avantis mute group (1-8) on or off.
SendsStarter1
Adjust an input's level in a monitor mix, an FX send or a matrix on the Avantis.
- Set send levelSet an Avantis input's send level in dB to an aux (monitor mix), FX send or matrix.
Routing & DCAsStarter3
Add an Avantis input to a DCA or mute group, or route it to or from the main mix.
- Set DCA assignmentAssign an Avantis input to a DCA (1-16), or remove it from the DCA.
- Set main mix assignmentAssign an Avantis input to the main mix, or take it off the main mix.
- Set mute group assignmentAssign an Avantis input to a mute group (1-8), or remove it from the mute group.
Channel LabelsStarter4
Read and set the name and colour of a given Avantis input, group, aux, matrix, FX send or return, main or DCA.
- Get channel colourRead an Avantis channel colour: off, red, green, yellow, blue, purple, light_blue or white.
- Get channel nameRead an Avantis channel name (scribble strip label, up to 8 characters).
- Set channel colourSet an Avantis channel colour: off, red, green, yellow, blue, purple, light_blue or white.
- Set channel nameRename an Avantis channel: set the channel name (scribble strip label, up to 8 characters: letters, digits, space and common punctuation, no '$').
ScenesStarter1
Recall a stored scene on the Avantis by number, with an operator confirmation first.
- Recall sceneRecall an Avantis scene (1-500).
Bench ProbesStarter1
A bench-only probe used to confirm what an Avantis can report while the integration is validated. The assistant cannot call it.
- Get dlive style replyBench probe: ask an Avantis input in a dLive get form (form: mute, fader or main_assign) and return any SysEx the desk answers within 0.3 s.
Compatibility
Supported models
- Allen & Heath AvantisHardware · V1.10+Mutes, faders, sends, assignments, labels and scenes on the Avantis.