Skip to content
Skip to content
Integrations

NETGEAR AV Line

Deep integration via the Netgear AV REST API for AV Line Managed Switches. Monitor switch utilization, manage PoE budgets, and cycle port power.

55 Tool Functions · 8 capabilities · 4 supported models

NETGEAR M4350-24X8F8V (XSM4340V) Pro AV managed switch, front view

Capabilities

Everything Showcaller can do with NETGEAR AV Line

Keep the show network in check from the same seat you run the show. Showcaller AI connects to NETGEAR AV Line managed switches in the M4250, M4300, M4350 and M4500 series. It answers the questions that usually mean a walk to the rack. For example, which port is that camera on, and how much PoE does it draw? How much of the switch's power budget is left? Also, which ports carry the Dante VLAN, and which multicast groups are on the switch?

Badges show the plan a group of Tool Functions is included from. Higher plans include everything below them. Compare plans

How it works

How it works with NETGEAR AV Line

Is a PTZ camera or an NDI encoder frozen? Then ask Showcaller to turn the PoE power on its port off and back on. Some network changes can take part of the show down, such as port power and VLAN changes. Port settings, reboots and firmware belong in the same group. So Showcaller confirms each of these with you before it sends them.

The NETGEAR AV Line integration also covers VLANs and their AV network profiles. It handles link aggregation (LAG and MLAG) and LLDP neighbors, plus port traffic and error counters. You can run ping, traceroute and DNS tests from the switch itself. Showcaller also manages DHCP reservations and bindings, switch user accounts, and configuration backup and restore. Finally, it handles firmware and fan mode for quiet rooms.

Showcaller reaches the switch through the Bridge App on your show network. It signs in with the switch's own admin account. Then it reads some changes back from the switch to confirm they landed, such as port and PoE settings. For others, it reports what the switch answered.

Tool Functions

Every Tool Function for NETGEAR AV Line

Grouped by capability, with the plan each group is included from. Where the device reports its state, Showcaller reads the change back before calling it done.

Basic Switch OperationStarter5

Monitor the heartbeat of your AV network. Check system device models, read MAC addresses, and ensure device up-time is stable to pinpoint connectivity failures before they effect a show.

  • Get device infoReads the switch's model, firmware, MAC address, uptime, fan state, temperature, and CPU and memory use.
  • Get PoE port statusReads the Power over Ethernet status of every port on the switch.
  • Get port statusLists every port's link state, enabled state, speed and description.
  • LoginSigns in to the switch; Showcaller normally does this for you with the connection's saved login.
  • LogoutEnds Showcaller's current session on the switch.
Port & PoE ManagementPro3

Solve endpoint lockups without opening a rack. Instantly view individual port link statuses, check connection speeds, and remotely restart PoE power lines to bring frozen Dante or NDI endpoints back online.

  • Get LLDP neighborsLists the devices plugged into each port, with the name, IP address and MAC address each one announces.
  • Set PoE port enabledTurns PoE power on or off on one port without affecting its network traffic.
  • Set port configTurns a port on or off, or sets its speed, duplex or description. Only whether the port is on or off is read back from the switch.
Advanced PoEEnterprise3

Never exceed your switch's capacity. Proactively query exactly how much power your PTZ cameras and audio receivers are pulling globally against the switch's total PoE budget.

  • Get PoE system infoReads the switch's total PoE power budget, the power in use and the power still available.
  • Set PoE port power limitCaps the power a PoE port can deliver, in watts.
  • Set PoE port prioritySets a port's PoE priority from low to critical, which decides which ports lose power first when the power budget runs short.
VLAN ManagementEnterprise9

Segregate Dante, NDI, and control data effortlessly. List active VLANs, assign new switch ports to specific audio networks, or completely re-IP a video network remotely.

  • Create VLANCreates a VLAN with a name, network profile, IP address mode and DHCP mode.
  • Delete VLANDeletes a VLAN from the switch.
  • Get network profilesLists the network profiles the switch offers for VLANs, such as its audio and video-over-IP profiles.
  • Get VLAN portsReads which ports carry one VLAN, tagged or untagged.
  • Get VLANsLists every VLAN on the switch with its network profile and member ports.
  • Set port VLANPuts a port on a VLAN as tagged or untagged while keeping the VLAN's other ports; not available for ports on the second or later switch in a stack.
  • Set VLAN DHCPSets whether the switch hands out addresses on a VLAN, relays requests to another DHCP server, or does neither.
  • Set VLAN IPSets how a VLAN gets an IP address on the switch: none, from DHCP, or a static address and mask.
  • Update VLANChanges the network profile applied to an existing VLAN, such as a profile tuned for NDI video with Dante audio.
Switch AdministrationEnterprise19

Keep the backbone optimized. Modify fundamental switch configurations like the administrative device name, or adjust fan cooling curves during quiet theatrical performances.

  • Apply firmware updateInstalls firmware already uploaded to the switch into image slot 1 or 2, with a restart now or later.
  • Download config backupDownloads the settings backup file the switch has prepared.
  • Factory resetErases all of the switch's settings, including VLANs and user accounts, and restarts it with factory defaults.
  • Generate config backupPrepares a backup file of the switch's settings, ready to download.
  • Get device timeReads the switch's clock, time zone and daylight saving settings.
  • Get firmware infoReads the firmware versions in the switch's active and backup image slots.
  • Get http configReads whether the switch's web management is on over HTTP and HTTPS, and on which ports.
  • Get management interfaceReads the switch's management IP address, subnet mask, gateway and VLAN, and whether it uses DHCP.
  • Get oob managementReads the settings of the switch's dedicated out-of-band management port.
  • Get restore statusReads whether a settings restore is still running, has finished or has failed.
  • Get stacking infoReads the switch stack: each unit's number, model and role.
  • Reboot deviceRestarts the switch, saving its running settings first unless told not to.
  • Restore configApplies a settings file already uploaded to the switch, restoring its configuration.
  • Save configSaves the switch's running settings so they survive a reboot.
  • Set device nameRenames the switch.
  • Set device timeSets the switch's date and time, and optionally its time zone and UTC offset.
  • Set fan modeSets the switch fans to off, quiet or cool.
  • Set management interfaceSets the switch's management address on a chosen VLAN, either from DHCP or as a static IP address, mask and gateway.
  • Set stp prioritySets the switch's spanning tree priority; the switch with the lowest value becomes the root of the network.
AV NetworkingPro3

Fine-tune advanced AV-over-IP mechanics. Interrogate Link Aggregation Groups (LAG) and evaluate Spanning Tree Protocol (STP) bridges to prevent catastrophic network loops on massive matrixes.

  • Get lag configReads the switch's link aggregation groups, the bundles of ports that work as one link.
  • Get mlag configReads the switch's multi-chassis link aggregation settings, for links shared across two switches.
  • Get multicast groupsLists the multicast groups on the switch and which ports receive each stream.
Network DiagnosticsEnterprise4

Troubleshoot connectivity from the console. Tell Showcaller to execute low-level traceroutes or physical cable tests from the switch port, pinpointing damaged copper runs in seconds.

  • Dns lookupLooks up a domain name from the switch to check its name resolution.
  • Get port statisticsReads each port's inbound or outbound traffic counters and errors.
  • Ping testPings an address from the switch itself and reports packet loss and response times.
  • TracerouteTraces the network path from the switch to an address, hop by hop.
DHCP & AccountsEnterprise9

Manage network IP leasing cleanly. Secure static DHCP reservations for mission-critical video encoders directly on the switch to prevent unintentional IP changes after power cycles.

  • Add user accountAdds an admin or guest user account to the switch.
  • Clear DHCP bindingsClears every DHCP lease on a VLAN, so its devices have to ask for an address again.
  • Create DHCP reservationReserves an IP address for one device on a VLAN, so it always gets the same address.
  • Delete DHCP reservationRemoves a device's reserved IP address on a VLAN.
  • Delete user accountDeletes a user account from the switch.
  • Edit user accountChanges a switch user account's password and account type.
  • Get DHCP bindingsLists the IP addresses the switch's DHCP server has handed out and to which devices, optionally for one VLAN.
  • Get DHCP reservationsLists the IP addresses reserved for particular devices, optionally for one VLAN.
  • Get user accountsLists the switch's user accounts, or reads one by name.

Compatibility

Supported models

  • NETGEAR M4250-26G4F-PoE+ (GSM4230P) AV managed switch, port sideM4250 SeriesHardware · 13.xMonitor and control the dedicated 1G AV Line switches, managing PoE budgets and link states.
  • NETGEAR M4300-52G-PoE+ managed switch, 3/4 front viewM4300 SeriesHardware · 13.xRetrieve detailed diagnostics from this robust 1G/10G enterprise AV core networking series.
  • NETGEAR M4350-24X8F8V (XSM4340V) managed switch, front viewM4350 SeriesHardware · 13.xGain oversight capabilities on the extreme bandwidth M4350 AV network switches.
  • NETGEAR M4500-32C 100G managed switch, 3/4 front viewM4500 SeriesHardware · 13.xUnprecedented visibility into 100G core enterprise network AV switches.

FAQ

Questions about NETGEAR AV Line switches

Which NETGEAR switches are supported?

Showcaller supports the M4250, M4300, M4350 and M4500 series, on switch firmware 13.x. For example, you can read about the M4250 series on the NETGEAR site.

What do I need to connect a switch?

You need the switch's management IP address, which uses web port 80 by default. You also need an admin username and password for the switch. Then run the Showcaller Bridge App on a computer on the same network.

Which plan includes which Tool Functions?

Starter includes Basic Switch Operation: switch info and port and PoE status (5 Tool Functions). Pro adds Port & PoE Management and AV Networking (6 more). These cover PoE on/off per port, port settings and LLDP neighbors. They also cover LAG, MLAG and multicast groups. Enterprise adds Advanced PoE, VLAN Management and Switch Administration. It also adds Network Diagnostics and DHCP & Accounts, so Enterprise brings 44 more in total. Each plan includes every Tool Function of the plans below it. See the pricing page to compare plans.

Will Showcaller change my network without asking?

No. Some changes can affect traffic or power, such as PoE, port settings and VLANs. Reboots, firmware, configuration restores and factory reset belong here too, and so do user accounts. Showcaller asks for your confirmation before it sends any of them.

Can it read my spanning tree configuration?

No. Showcaller can set the switch's spanning tree priority. However, it does not read the spanning tree topology.