Tractus NDI Router
API integration for Tractus NDI Router. Build and trigger localized NDI video routing tables, fetch custom endpoints, and execute switches remotely.
11 Tool Functions · 2 capabilities · 1 supported version

Capabilities
Everything Showcaller can do with Tractus NDI Router
NDI routing control by voice: switch NDI video across your network by asking for it. Showcaller AI connects to Tractus NDI Router version 2025.x. It lists every NDI source the router can see and every destination you have defined. Then it routes a source to a destination by voice or chat. For example, say "put the stage camera on the foyer screen" or "clear the confidence feed".
Badges show the plan a group of Tool Functions is included from. Higher plans include everything below them. Compare plans
How it works
How it works with Tractus NDI Router
Routing works by the source's full NDI name, including the computer it comes from. A typical name looks like "STUDIO-PC (vMix - Output 1)". If you ask for a name the router cannot see, Showcaller refuses the route and sends nothing. Instead, it suggests the closest matches it can find. That keeps a misheard name from putting the wrong picture on a screen.
Beyond routing, Showcaller can manage the router itself. It can create a destination, rename it or delete it. It can also lock a destination so nobody switches it by accident, then unlock it again. Finally, it can reset the router to a clean start. After each change, Showcaller reads the router back to confirm the route, the lock or the destination list. Only then does it report success.
Showcaller reaches the router through the Bridge App on your show network. So broadcast engineers and non-technical operators get NDI routing control without opening the router's own interface.
Tool Functions
Every Tool Function for Tractus NDI Router
Grouped by capability, with the plan each group is included from. Where the device reports its state, Showcaller reads the change back before calling it done.
NDI Routing EssentialsStarter5
Discover your available endpoints in real-time. Automatically pull down comprehensive lists of active NDI sources and predefined destinations across the local network so Showcaller can accurately build your custom routing commands.
- Clear routeClear a destination slot so it no longer carries any NDI source.
- Get sourceCheck whether an NDI source with exactly this full name is visible to the router, and suggest close matches when it is not.
- List destinationsList the router's destination slots with each slot's name, code, current source and whether it is locked.
- List sourcesList every NDI source the router can see, by its full name including the computer it comes from.
- Route sourceRoute an NDI source to a destination slot by the source's exact full name; any other name is refused and nothing is sent.
Router AdministrationPro6
Execute the flip. Command Showcaller to evaluate the active NDI connection flowing to a specific destination point and immediately execute a switch to an alternative source. Change complex IP flows globally with a single request.
- Create destinationCreate a new destination slot under a display name, optionally with a default NDI source; the router assigns the slot's code.
- Delete destinationDelete one destination slot from the router, along with its route.
- Lock destinationLock a destination slot so the router refuses new routes to it until it is unlocked.
- Rename destinationChange a destination slot's display name; its code stays the same.
- Reset routerDelete every destination slot on the router at once, with all their routes; the slots and their codes cannot be brought back.
- Unlock destinationUnlock a destination slot so it can be routed again.
Compatibility
Supported versions
Tractus NDI Router DefaultSoftware · 2025.xConfigure and switch local NDI network flows utilizing the Tractus virtual routing engine.
FAQ
Questions about NDI routing control with Tractus
Which versions are supported?
Showcaller supports Tractus NDI Router 2025.x.
What do I need to connect it?
You need the IP address of the computer that runs Tractus NDI Router. The default port is 8902. You also need the Showcaller Bridge App on the same network.
Which plan includes which Tool Functions?
Starter includes NDI Routing Essentials (5 Tool Functions). With it, you can list sources and destinations, check a source, and route or clear a destination. Pro adds Router Administration (6 more). It lets you create, rename and delete destinations. It also locks and unlocks them, and it can reset the router. This integration has no Enterprise-only functions. Each plan includes every Tool Function of the plans below it. See the pricing page to compare plans.
What happens if Showcaller mishears a source name?
Showcaller only sends a route for a source name that the router actually lists. It refuses any other name, so nothing changes. Instead, it suggests the closest names it found.
Can a reset be undone?
No. A reset deletes every destination and its route. After that, nobody can bring the destination codes back. That is why Showcaller asks you to confirm a reset first.
