Skip to content
Skip to content
Blog

QLab Support Is Here – Voice-Trigger Your Cue Lists

If your show runs on QLab, you already know the playhead is the most important object in the room. With QLab voice control, Showcaller can now move it through OSC control of Figure 53’s QLab.

QLab voice control, in practice

This integration isn’t about replacing QLab’s interface. It’s about not needing to touch it for the routine stuff. Fire the next cue. Jump to a specific cue number. Stop everything if something’s going wrong. You do all of it by voice, while your hands and eyes stay on the show instead of the laptop.

That last one matters more than it sounds like it should. If you have to physically reach for a panic-stop, you’re a half-second too slow. However, a panic-stop you can just say isn’t.

Tally reads back most QLab changes. So a GO isn’t done just because the OSC command went out. It’s done when QLab reports the change. If a cue doesn’t fire the way it should, you find out immediately instead of mid-scene.

What you can run in QLab by voice or chat

Beyond GO, Showcaller can hold and resume, move the playhead and fire a cue out of order. For example, it can jump to cue 42 or start the walk-in music early. It can also read and change cue names, numbers, colors, notes and waits. Then there’s editing, such as Audio cue levels, Text cues, Light cues and the Light Dashboard.

Some actions ask for your confirmation first. These include stops, panics, deleting or renumbering cues and saving the workspace. Showcaller supports QLab 5 and QLab 4. To connect, turn on “Use OSC controls” in Workspace Settings. The Showcaller Bridge App then reaches the show Mac over your local network.

More integrations

QLab voice control joins a list of integrations that are live today. For video, there’s vMix and Blackmagic ATEM, plus Panasonic PTZ and NDI. Mixers include Behringer X32/Midas M32 and Behringer XAir/Midas MR, plus Allen & Heath SQ. For wireless, there’s Shure Wireless and Sennheiser EW-DX. MA Lighting grandMA2/grandMA3 covers lighting. Bitfocus Companion and Ubiquiti AV are live too.

Full QLab integration details →

Run your next show with Showcaller AI

Connect your gear in minutes and run your show by voice or chat.

Blog

More from the blog

October 1, 2026

Elevating Multi-Room Event Management: Showcaller Skybox Makes Its Real-World Debut at Gosec 2026

We are thrilled to share a massive milestone for the team here at Showcaller.ai. At Gosec 2026, we ran the first live, real-world test of our Skybox feature. We also tested a set of new hardware and software integrations. The live events industry is fast-paced, and the margin for error is razor-thin. We built Showcaller […]

Read more →

September 10, 2026

Showcaller Now Talks to Allen & Heath SQ

Allen & Heath SQ-5, SQ-6, and SQ-7 consoles can now be run by voice through Showcaller's native MIDI integration — scene recall and channel control without leaving your position.

Read more →

September 9, 2026

QLab Support Is Here – Voice-Trigger Your Cue Lists

QLab cue lists can now be fired, jumped, and panic-stopped by voice. Most QLab changes are read back from QLab.

Read more →