Skip to content
Skip to content
Blog

Showcaller Now Talks to Allen & Heath SQ

SQ voice control is here for Allen & Heath SQ-5, SQ-6 and SQ-7 consoles. Showcaller talks to them through a native SQ MIDI integration.

If you’ve worked FOH or monitors on an SQ, you know the rhythm. You recall a scene between songs. Then you mute a channel that’s about to feed back. You do it all with your hands full and your eyes on the stage, not the desk. That’s the moment voice control is built for. The desk’s surface isn’t hard to use. However, every second you spend looking down at it is a second away from the show.

Allen & Heath SQ voice control, verified

This runs over the SQ’s native MIDI protocol, not a workaround. So it talks to the console the way the console expects. After each change, Tally reads mutes and levels back from the desk. Showcaller doesn’t just send the instruction and move on. If a mute doesn’t latch, you hear about it right away. You don’t wait for someone to notice the channel is still open.

What SQ voice control covers

With SQ voice control, you can mute inputs and set their faders into the main LR mix. You can also ride the Main LR master and the Aux/Mix masters. For monitor and in-ear mixes, Showcaller sets each input’s send to an Aux/Mix. It also handles sends to the four FX engines, the eight DCAs and the eight mute groups. Then there are the Soft Keys and scene recall from 1 to 300. Because a scene recall replaces the live mix, Showcaller asks you to confirm it first.

Setup comes down to two console settings. First, the SQ’s MIDI channel must match the one you set in Showcaller. Second, set the NRPN fader law to Linear Taper, so levels in dB stay accurate. The Showcaller Bridge App then connects to the desk on your show network. You can find the console itself on the Allen & Heath SQ product page.

More integrations

This is one more integration in a list that’s grown faster than most people expect from a young company. For video, vMix and Blackmagic ATEM are already in, plus Panasonic PTZ and NDI. Mixers include Behringer X32/Midas M32 and Behringer XAir/Midas MR. For wireless, there’s Shure Wireless and Sennheiser EW-DX. MA Lighting grandMA2/grandMA3 covers lighting. Bitfocus Companion, NETGEAR AV, and QLab are in too. Yamaha joined most recently, and more integrations ship regularly.

Full Allen & Heath SQ integration details →

Have a desk or device you want prioritized? Reach out. Partner requests often move an integration up the list.

Run your next show with Showcaller AI

Connect your gear in minutes and run your show by voice or chat.

Blog

More from the blog

October 1, 2026

Elevating Multi-Room Event Management: Showcaller Skybox Makes Its Real-World Debut at Gosec 2026

We are thrilled to share a massive milestone for the team here at Showcaller.ai. At Gosec 2026, we ran the first live, real-world test of our Skybox feature. We also tested a set of new hardware and software integrations. The live events industry is fast-paced, and the margin for error is razor-thin. We built Showcaller […]

Read more →

September 10, 2026

Showcaller Now Talks to Allen & Heath SQ

Allen & Heath SQ-5, SQ-6, and SQ-7 consoles can now be run by voice through Showcaller's native MIDI integration — scene recall and channel control without leaving your position.

Read more →

September 9, 2026

QLab Support Is Here – Voice-Trigger Your Cue Lists

QLab cue lists can now be fired, jumped, and panic-stopped by voice. Most QLab changes are read back from QLab.

Read more →