Skip to content
Skip to content
Blog

Showcaller Now Talks to BirdDog NDI Converters

BirdDog’s NDI converter line is now connected to Showcaller. That covers the SDI4K, HDMI4K and QUAD. It also covers the Flex, Play and Studio.

What the BirdDog NDI converter integration unlocks

Converters are the easy part of an NDI workflow to forget about. That lasts until one of them isn’t doing what it’s supposed to. They sit at the edge of the network, quietly turning SDI or HDMI into NDI (or back). When something’s wrong with a source, the converter is one of the first places worth checking. Usually that means walking over to it. Now that’s a question you can ask instead.

This pairs naturally with the Tractus NDI Router integration. The router handles where a signal goes. The converter handles getting it onto the network in the first place. Showcaller can now see and control both ends of that chain.

BirdDog joins Tractus NDI Router, vMix, Blackmagic ATEM and Behringer X32/Midas M32. It also joins Behringer XAir/Midas MR, MA Lighting grandMA2/grandMA3, Shure Wireless and Sennheiser EW-DX. Panasonic PTZ, Bitfocus Companion and NETGEAR AV are on the list too. So are QLab, Allen & Heath SQ and Ubiquiti AV.

Full BirdDog NDI Converter integration details →

Run your next show with Showcaller AI

Connect your gear in minutes and run your show by voice or chat.

Blog

More from the blog

October 1, 2026

Elevating Multi-Room Event Management: Showcaller Skybox Makes Its Real-World Debut at Gosec 2026

We are thrilled to share a massive milestone for the team here at Showcaller.ai. At Gosec 2026, we ran the first live, real-world test of our Skybox feature. We also tested a set of new hardware and software integrations. The live events industry is fast-paced, and the margin for error is razor-thin. We built Showcaller […]

Read more →

September 10, 2026

Showcaller Now Talks to Allen & Heath SQ

Allen & Heath SQ-5, SQ-6, and SQ-7 consoles can now be run by voice through Showcaller's native MIDI integration — scene recall and channel control without leaving your position.

Read more →

September 9, 2026

QLab Support Is Here – Voice-Trigger Your Cue Lists

QLab cue lists can now be fired, jumped, and panic-stopped by voice. Most QLab changes are read back from QLab.

Read more →