Skip to content
Skip to content
Blog

Showcaller Now Talks to Tractus NDI Router

The Tractus NDI Router is now connected to Showcaller. You can build and trigger localized NDI video routing tables by voice. You can also fetch custom endpoints and execute switches remotely the same way.

What the Tractus NDI Router integration actually removes

NDI routing is simple in concept and fiddly in practice. Source A needs to go to destination B. But doing that through a routing interface mid-show means stepping away from whatever else you’re tracking. Now you can say the route you want and have it executed. Tally confirms the switch actually took. That removes a step that used to require a separate screen and a separate moment of attention.

This pairs directly with BirdDog NDI Converter support. The converter gets a signal onto the network as NDI. The router decides where it goes from there. Showcaller now sits across both ends of that path.

Tractus NDI Router joins BirdDog NDI Converter, vMix, Blackmagic ATEM and Behringer X32/Midas M32. It also joins Behringer XAir/Midas MR, MA Lighting grandMA2/grandMA3, Shure Wireless and Sennheiser EW-DX. Panasonic PTZ, Bitfocus Companion and NETGEAR AV are on the list too. So are QLab, Allen & Heath SQ and Ubiquiti AV.

Full Tractus NDI Router integration details →

Run your next show with Showcaller AI

Connect your gear in minutes and run your show by voice or chat.

Blog

More from the blog

October 1, 2026

Elevating Multi-Room Event Management: Showcaller Skybox Makes Its Real-World Debut at Gosec 2026

We are thrilled to share a massive milestone for the team here at Showcaller.ai. At Gosec 2026, we ran the first live, real-world test of our Skybox feature. We also tested a set of new hardware and software integrations. The live events industry is fast-paced, and the margin for error is razor-thin. We built Showcaller […]

Read more →

September 10, 2026

Showcaller Now Talks to Allen & Heath SQ

Allen & Heath SQ-5, SQ-6, and SQ-7 consoles can now be run by voice through Showcaller's native MIDI integration — scene recall and channel control without leaving your position.

Read more →

September 9, 2026

QLab Support Is Here – Voice-Trigger Your Cue Lists

QLab cue lists can now be fired, jumped, and panic-stopped by voice. Most QLab changes are read back from QLab.

Read more →