MA Lighting grandMA2
Remote control for grandMA2 consoles via TCP Telnet commands.
13 Tool Functions · 6 capabilities · 3 supported models

Capabilities
Everything Showcaller can do with MA Lighting grandMA2
Showcaller AI gives you grandMA2 remote control from the same conversation as the rest of the show. It connects to a grandMA2 console or grandMA2 onPC over the network. Then it fires what the lighting operator would, by voice or chat. For example, it can Go on sequence 1, jump to cue 12 or step back a cue. It can also pause a sequence or push executor 5 on page 2 to 80 percent. Switching to page 3 or running macro 20 works the same way.
Badges show the plan a group of Tool Functions is included from. Higher plans include everything below them. Compare plans
How it works
How it works with MA Lighting grandMA2
Showcaller logs in to the console with the user account you give it, through the Bridge App on your show network. It reads the console's reply to every command. So when the console refuses a command, Showcaller reports a failure, not a success. It also reads which executor page is active, so it confirms a page change. However, the console does not report playback state in a form Showcaller can read yet. So Showcaller reports a Go or a fader move as accepted by the console. It does not check it against the stage.
For anything the playback functions do not cover, you can use the command line. Showcaller types the command exactly as you would. Command-line use, macros and turning sequences or executors off all need your confirmation first.
Showcaller supports the grandMA2 full-size, grandMA2 light and grandMA2 onPC on software 3.x. MA Lighting describes the range on its grandMA2 page. For the newer consoles, see the MA Lighting grandMA3 integration.
Tool Functions
Every Tool Function for MA Lighting grandMA2
Grouped by capability, with the plan each group is included from. Where the device reports its state, Showcaller reads the change back before calling it done.
Device DiagnosticsStarter1
Check the connection status of the grandMA2 console. Verifies the bridge can ping the Telnet port 30000.
- Get statusChecks that the grandMA2 console is on the network and accepts the login saved on this connection.
Sequence & Cue PlaybackStarter5
Run sequences and step through cues. Perform Go, Go+, Go-, Pause, and Off actions on sequences by number.
- Go minus sequenceSteps a sequence back to its previous cue.
- Go plus sequenceSteps a sequence on to its next cue.
- Go sequenceFires the next cue of a sequence, or jumps straight to the cue number you name.
- Off sequenceTurns a running sequence off.
- Pause sequencePauses a running sequence, or resumes it if it is already paused.
Macro TriggersStarter1
Safely execute pre-recorded grandMA2 macros. Fire macros by number for pre-programmed transitions, palette recalls, or layout switches.
- Run macroRuns one of the console's stored macros by its number.
Executor ControlPro3
Granular playback control of executor buttons and fader levels. Set fader percentages or fire Go and Off actions on specific executors.
- Go executorPresses Go on an executor, chosen by page and executor number.
- Off executorTurns an executor off, chosen by page and executor number.
- Set executor faderMoves an executor fader to a level from 0 to 100 percent.
Page ManagementPro2
Manage executor layout focus. Switches the active physical fader/button page on the console.
- Get active pageReads which executor page is active for the user Showcaller logs in as.
- Set active pageSwitches the console to another executor page.
Raw Command LineEnterprise1
Full console command-line access. Unrestricted CLI command passthrough to execute any console action directly from the command line.
- Send cmdTypes any command into the console's command line, for anything the other functions do not cover.
Compatibility
Supported models
grandMA2 FullsizeHardware · v3.xFull-size grandMA2 console playback and CLI command control.
grandMA2 LightHardware · v3.xgrandMA2 light console playback and CLI command control.
grandMA2 onPCSoftware · v3.xgrandMA2 onPC playback and CLI command control.
FAQ
Questions about grandMA2 remote control
Which grandMA2 consoles are supported?
Showcaller supports grandMA2 full-size, grandMA2 light and grandMA2 onPC. They must run grandMA2 software 3.x.
What do I need to connect it?
You need the IP address of the console or onPC computer. You also need a console login. By default, that is the "administrator" user with no password. Then run the Showcaller Bridge App on a computer on the same network. On the console, switch "Login Enabled" on. Also allow Telnet access for the computer that runs the Bridge App.
Which plan includes which Tool Functions?
Starter includes Device Diagnostics, Sequence & Cue Playback and Macro Triggers (7 Tool Functions). Pro adds Executor Control and Page Management (5 more). Enterprise then adds the Raw Command Line (1 more). Each plan includes every Tool Function of the plans below it.
Does Showcaller confirm that a cue actually ran?
It confirms that the console accepted the command, and it reports any refusal. However, it does not yet read playback state back from the console. So it cannot confirm what is on stage. Page changes are the exception, because Showcaller reads them back.


