Panasonic PTZ
Full CGI REST API integration for Panasonic PRO PTZ cameras. Remotely control PTZ movements, recall presets, adjust focus, and manage camera power.
52 Tool Functions · 6 capabilities · 7 supported models

Capabilities
Everything Showcaller can do with Panasonic PTZ
Call your Panasonic PRO PTZ cameras the way a camera operator would. This is Panasonic PTZ remote control by voice or chat, with Showcaller AI. For example, ask Showcaller to recall preset 4 on camera 2 or send camera 1 home. You can also store the current shot as the lectern preset. Or ask it to pan left slowly until you say stop.
Badges show the plan a group of Tool Functions is included from. Higher plans include everything below them. Compare plans
How it works
How it works with Panasonic PTZ
Showcaller connects to each camera over your local network through the Bridge App. Before the show, it can read each camera's model, firmware and pan and tilt position. It also reads lens zoom, focus and iris, the tally state and the last recalled preset. So you know the fleet is where it should be.
During the show, Showcaller recalls and stores presets 1 to 100. It moves pan, tilt and zoom with Panasonic's own speed control. It also switches focus and iris between auto and manual. And it can pull focus by hand and set the iris level.
Showcaller also handles the camera's IP video output. First, it reads which streaming mode the camera is in and what it supports. Then it can switch between modes such as H.264, H.265, SRT or NDI|HX. It also sets the NDI name and group, and changes resolution, frame rate and bitrate. Before a stream change or storing a preset, Showcaller asks you to confirm. Where the camera reports the result, Showcaller reads it back.
Supported cameras range from the AW-UE160 to the AW-UE4, with the full list in the FAQ below. However, not every model offers every streaming mode. So Showcaller can read each camera's own capability report to see what it supports.
Tool Functions
Every Tool Function for Panasonic PTZ
Grouped by capability, with the plan each group is included from. Where the device reports its state, Showcaller reads the change back before calling it done.
Panasonic Device DiagnosticsStarter17
Ensure total confidence in your robotic fleet. Fetch power states, exact device models, and active MAC addresses before the show begins to confirm all cameras are fully operational.
- Get camera infoReport the camera's model name, firmware version, serial number and MAC address.
- Get focus modeReport whether the camera's focus is set to auto or manual.
- Get focus mode cameraReport whether focus is auto or manual through a second, separate camera query, for cross-checking.
- Get iris levelRead the iris opening as a percentage, from 0 (closed) to 100 (fully open).
- Get iris modeReport whether the camera's iris is set to auto or manual.
- Get iris mode cameraReport whether the iris is auto or manual through a second, separate camera query, for cross-checking.
- Get last recalled presetReport which preset, from 1 to 100, was recalled last.
- Get lens statusRead the lens's current zoom, focus and iris positions.
- Get pan tilt positionRead the camera head's current pan and tilt position as plain numbers.
- Get preset entryReport whether a preset from 1 to 100 has a position stored in it.
- Get PTZ statusRead the camera head's current pan and tilt position, as the camera's raw position values.
- Get tally statusReport whether the camera's tally is on or off.
- Move homeMove the camera head back to its centre home position for pan and tilt.
- Move to positionMove the camera head to an exact pan and tilt position, given as the camera's raw position values.
- Reboot cameraRestart the camera remotely; its video and control drop while it reboots.
- Recall presetMove the camera to a stored preset, numbered 1 to 100.
- Store presetSave the camera's current shot to a preset number from 1 to 100, replacing whatever was stored there.
Panasonic Basic ControlsPro9
Fluidly manage your camera framing. Trigger reliable pan, tilt, and zoom movements, or seamlessly retrieve programmed focal presets utilizing Panasonic’s native speed controls.
- Pan tilt startStart the camera head moving in one of eight directions at a chosen speed until it is told to stop.
- Pan tilt stopStop the camera head's pan and tilt movement where it is.
- Set focus autoSwitch the camera's focus to auto, so it focuses by itself.
- Set focus manualSwitch the camera's focus to manual, ready for focus pulls.
- Set iris autoSwitch the camera's iris to auto, so it sets exposure by itself.
- Set iris levelSet the iris opening for manual iris, as a percentage from closed to fully open.
- Set iris manualSwitch the camera's iris to manual, ready for a set iris level.
- Zoom startStart zooming in or out at a chosen speed until it is told to stop.
- Zoom stopStop the lens zooming, leaving it at its current zoom position.
Panasonic Advanced ControlsEnterprise4
React to changing stages dynamically. Send commands to adjust complex focus modes or instantly reboot the camera robotics if sensors lock up mid-production.
- Focus far startStart pulling focus farther at a chosen speed until stopped; the camera ignores it while auto focus is on.
- Focus near startStart pulling focus nearer at a chosen speed until stopped; the camera ignores it while auto focus is on.
- Focus stopStop a focus pull that is in progress, leaving focus where it stopped.
- Set tally modeTurn the camera's tally on or off.
Panasonic IP Video DiagnosticsStarter10
Understand your network video capacity. Identify which video formats, codecs, and NDI/SRT streaming endpoints the specific camera model supports before configuring outputs.
- Get IP video statusRead the camera's settings report for one of its H.264 or H.265 streams.
- Get model capabilitiesRead the camera's own capability report: the resolutions, frame rates and streaming modes it supports.
- Get NDI statusRead the camera's NDI or NDI|HX source name, group, transport and multicast setting. Full NDI is not available on AW-UE150, which has NDI|HX only.
- Get stream bitrateRead the bitrate of one H.264 or H.265 stream from the camera's stream settings report.
- Get stream configRead one H.264 or H.265 stream's settings: resolution, bitrate, maximum frame rate, quality and unicast or multicast delivery.
- Get stream framerateRead one H.264 or H.265 stream's maximum frame rate; the camera reports the ceiling, not the rate that was set.
- Get stream modeReport which streaming mode the camera is in now, for example H.264, H.265, SRT or NDI|HX.
- Get stream resolutionRead the resolution of one H.264 or H.265 stream from the camera's stream settings report.
- List supported stream modesList the streaming modes this camera supports, from the camera's own capability report.
- List supported video formatsList the stream resolutions, frame rates and codecs this camera supports, from its own capability report.
Panasonic IP Video ControlPro8
Reconfigure streaming endpoints on the fly. Switch transmission modes off for privacy, or toggle exactly which encoded channel transmits over your local corporate network.
- Set NDI bandwidth modeSet the NDI output's unicast transport and turn multicast sending on or off. Did not take effect on an AW-UE150 when tested.
- Set NDI modeSwitch the camera's stream to NDI or NDI|HX, in HD or UHD. Full NDI is not available on AW-UE150, which has NDI|HX only.
- Set NDI nameSet the source name, and optionally the group, that the camera's NDI or NDI|HX output is published under. Did not take effect on an AW-UE150 when tested.
- Set stream bitrateSet the target bitrate of one H.264 or H.265 stream, in kbps.
- Set stream codecSwitch the camera's stream to H.264 or H.265, in HD or UHD, on models that offer it.
- Set stream framerateSet the frame rate of one H.264 or H.265 stream, in frames per second.
- Set stream modeSwitch the camera's streaming mode, such as H.264, H.265, RTMP, SRT, MPEG-TS over UDP or NDI|HX; the modes offered vary by model.
- Set stream resolutionSet the resolution of one H.264 or H.265 stream, given as the picture width such as 1920 or 1280. Did not take effect on an AW-UE150 in NDI|HX mode when tested.
Panasonic Advanced Output ProfilesEnterprise4
Balance video quality with network bandwidth instantly. Tweak H.264 bitrates, change base resolutions, and update framerates to ensure smooth transmission across congested enterprise firewalls.
- Apply stream profileReport the camera's current streaming mode after stream changes; it applies nothing itself, since stream settings take effect when written.
- Set multi stream profileSet an extra H.264 or H.265 stream's delivery (unicast, manual unicast or multicast) and optionally its resolution, frame rate and bitrate.
- Set output protocol profileSet one H.264 or H.265 stream's delivery to unicast, manual unicast or multicast.
- Set secondary stream profileSet the resolution, frame rate or bitrate of a second H.264 or H.265 stream, normally stream 2.
Compatibility
Supported models
AW-HE145 / AW-HE130Hardware · HE145Extend remote AI-driven operation to high-end legacy HD PTZ cameras.
AW-UE100Hardware · UE100Orchestrate movements and preset recalls for this high-bandwidth 4K NDI® camera.
AW-UE150 / AW-UE150AHardware · UE150Control robust 4K 60p PTZ cameras designed for large venue setups.
AW-UE160Hardware · UE160Command the flagship 4K PTZ camera with uncompromising precision.
AW-UE30 / AW-UE20 / AW-UE4Hardware · UE30-UE4Automate compact PTZ operations for modern meeting rooms and lecture captures.
AW-UE80 / AW-UE50 / AW-UE40Hardware · UE80-UE40Manage standard 4K/HD installations efficiently via remote preset and PTZ control.
AW-UR100Hardware · UR100Ruggedized outdoor PTZ manipulation and preset recall.
FAQ
Questions about Panasonic PTZ remote control
Which Panasonic cameras are supported?
Showcaller supports the AW-UE160, AW-UE150 / UE150A, AW-UE100 and AW-UR100. It also supports the AW-UE80 / UE50 / UE40, AW-UE30 / UE20 / UE4 and AW-HE145 / HE130. Streaming features vary by model. For example, the AW-UE150 offers NDI|HX but not full NDI.
What do I need to connect a camera?
You need the camera's IP address. The web port is 80 by default. If authentication is on, you also need the camera's username and password. Finally, run the Showcaller Bridge App on a computer on the same network.
Which plan includes which Tool Functions?
Starter includes Device Diagnostics and IP Video Diagnostics (27 Tool Functions). They cover camera status, presets (recall and store), home and exact positioning, reboot and all stream reads. Pro adds Basic Controls and IP Video Control (17 more). Basic Controls covers pan, tilt and zoom, plus focus and iris modes and the iris level. IP Video Control sets the stream mode, codec and NDI. It also sets bitrate, frame rate and resolution. Enterprise adds Advanced Controls (manual focus pulls, tally) and Advanced Output Profiles (extra stream profiles and delivery) (8 more). Each plan includes every Tool Function of the plans below it. See pricing for the plans themselves.
Can Showcaller power cameras on and off?
No. Showcaller has no power on or off function. It can reboot a camera, but the camera then drops its video and control while it restarts.
Can I control Panasonic cameras that are inside vMix?
Yes, in two ways. You can control them directly with this integration. Or you can use vMix's own PTZ inputs with the vMix integration.






