Skip to content
Skip to content

Shure QLXD4 single-channel receiver

Showcaller AI reads and sets a Shure QLXD4 by voice or chat. It covers transmitter battery, output gain, the channel name and frequency. Remote mute is not available on QLX-D.

Shure QLXD4 single-channel receiver

Overview

The Shure QLXD4 single-channel receiver with Showcaller

The Shure QLXD4 is a QLX-D digital receiver for one wireless channel. It has an XLR output, a 1/4″ instrument output and one Ethernet port. Showcaller AI connects to the Shure QLXD4 over your show network through the Bridge App. Then it answers the questions an A2 asks all show long, by voice or chat. For example: How many minutes are left on the handheld? What gain is it at? Which Group and Channel is it on? The Shure wireless integration page lists every function.

Battery on the Shure QLXD4

Battery is where QLX-D does well. Showcaller reads the transmitter battery as bars, from 0 to 5, on every transmitter. With Shure rechargeable batteries, it also reads the runtime in minutes. Moreover, it reads the charge and health percentages of those batteries. The receiver’s own display shows the same runtime in hours and minutes. Battery functions are in every plan.

What the QLXD4 does not do

The QLXD4 has no remote audio mute. Shure’s network commands offer mute on ULX-D only. As a result, Showcaller cannot mute or unmute a QLX-D channel. Instead, mute the channel at your console. The QLXD4 also has no remote identify flash. So Showcaller cannot flash its front panel to find it in a rack. Showcaller does not scan the spectrum or lock transmitters either. Even so, the QLXD4 shares two features with ULX-D: AES-256 encryption and Shure rechargeable metering. You turn encryption on at the receiver.

Gain, names and frequency

From the Pro plan, Showcaller reads and sets the output gain in 1 dB steps. The range is -18 to +42 dB, the receiver’s own range. It also sets the channel name, from 1 to 8 characters, so “HOST” shows on the display. With Enterprise, Showcaller reads the frequency in kHz and the Group and Channel. It can also move the channel to a new frequency or Group/Channel. First, though, it asks you before it retunes. For full specs, see Shure’s QLXD4 product page.

What you can do

Run the Shure QLXD4 single-channel receiver by voice or chat

  • Battery runtime and health

    Battery bars on any transmitter. With Shure rechargeables, also runtime in minutes, charge and health percentage. Starter.

  • Firmware and status

    Read the firmware version and the full channel status in one request. Starter.

  • Gain in 1 dB steps

    Read or set the output gain from -18 to +42 dB. Pro.

  • Channel name

    Read or set the channel name, 1 to 8 characters. Pro.

  • Frequency and Group/Channel

    Read or change the frequency or Group/Channel. Showcaller asks before it retunes. Enterprise.

Specifications

Shure QLXD4 single-channel receiver at a glance

RF

Channels
1 receiver channel
Tuning bandwidth
64 MHz, region dependent; bands listed on shure.com (US): G50, H50, J50A, V50, X52
Compatible systems
More than 60 preset compatible channels per band; up to 17 systems per 6 MHz TV channel, 22 per 8 MHz
RF tuning step
25 kHz, varies by region
Working range
100 m (328 ft); depends on RF conditions
Diversity
Digital predictive switching diversity

Audio

Gain adjustment range
-18 to +42 dB in 1 dB steps
Audio outputs
XLR balanced, mic/line switchable (30 dB pad); 1/4" (6.35 mm) instrument output
Latency
< 2.9 ms
Dynamic range
> 120 dB, A-weighted, system gain +10

Control & network

Network interface
Single-port Ethernet 10/100 Mbps; DHCP or manual IP
Third-party control
AMX/Crestron control over Ethernet TCP/IP, port 2202
Encryption
AES-256

Physical

Dimensions and weight
41 x 197 x 151 mm (H x W x D); 777 g without antennas
Power
12 V DC at 0.4 A from an external supply

Specifications from the manufacturer. Check the product page for the current details.

Connection

Connecting the Shure QLXD4 single-channel receiver

Control protocol
Shure network control over TCP/IP on port 2202, through the Showcaller Bridge App. No username or password.
What Showcaller needs
The receiver's IP address, shown on the front panel in the Network menu, and the model QLXD4 (Single Channel).
Network
Connect the receiver's Ethernet port to the same network as the Bridge App.
Firmware
Showcaller reads the receiver's firmware version when it connects. On newer firmware, third-party network control may need to be switched on in Wireless Workbench or the receiver's web interface.
First check
Showcaller reads the firmware version to check it can reach the receiver, then reads the channel status.

FAQ

Questions about the Shure QLXD4 single-channel receiver

Can Showcaller mute a Shure QLXD4?

No. QLX-D receivers have no remote audio mute, so mute control works on ULX-D only. Mute the channel at your console instead.

How much battery is left on a QLX-D transmitter?

Ask Showcaller for the battery bars, on any transmitter. With a Shure rechargeable battery, it also reports runtime in minutes, charge and battery health as a percentage.

Can Showcaller flash a QLXD4 to find it in the rack?

No. The identify flash works on ULX-D and SLX-D receivers, not on QLX-D.

Can Showcaller change the frequency of a QLXD4?

Yes, with the Enterprise plan. It sets a new frequency or Group/Channel and asks you before it retunes. It does not run an RF scan.

Which Tool Functions apply to the QLXD4?

Status and firmware, battery, gain, channel name and frequency. Mute and the identify flash do not apply. So a Starter plan on a QLXD4 gives status and battery functions only.

Same integration

Other Shure Wireless models